Difference between revisions of "Category:Devices"

Jump to navigation Jump to search
(→‎Mesh Node Devices: Clarify the mesh node section.)
(Change warning to direct attention up to supported devices.)
Line 19: Line 19:
  
  
{{Warning| The following devices are unsupported. If you are looking to host a node, we do not recommend that you buy one of these, as it's not guaranteed that they will work in the mesh.}}
+
{{Warning| The following devices are unsupported. '''If you are looking to host a node, we recommend that you buy one of the supported devices,''' as it's guaranteed that they will work in the mesh.}}
{{Note| A great way to help the tech team is to work with us to add support for these devices.}}
+
{{Note| A great way to help the tech team is to work with us to add support for the WIP devices.}}
  
 
{| class="wikitable"
 
{| class="wikitable"

Revision as of 12:40, 16 January 2020

This page is used to document device compatibility and recommendations. Your custom router will require two main components: a device to run the MassMesh firmware and a radio so that you can connect with other nodes.

Mesh Node Devices

These are devices that can run the meshing protocol (Yggdrasil.) Once they have the Mass Mesh firmware flashed, you can connect to them for access to the mesh via wifi and/or ethernet. They will also automatically discover and connect to nearby mesh nodes via their connected mesh radio.

Supported Devices
Brand Model Yggdrasil Speed Mesh Exit Capable Built-in Wifi Outdoor Year MSRP Used Price
Raspberry Pi Foundation Raspberry Pi 4 Model B 450 Mbit/s No3 Yes No2 2019 $35.00 ?
PC Engines APU2 950 Mbit/s Yes No1 No2 2016 $115.00 ?

1 USB and 2 mini-pcie interfaces available to add one or more wifi interfaces
2 Possible with outdoor case
3 Possible with additional adapters


Warning: The following devices are unsupported. If you are looking to host a node, we recommend that you buy one of the supported devices, as it's guaranteed that they will work in the mesh.
Note: A great way to help the tech team is to work with us to add support for the WIP devices.
Work In Progress (WIP) Devices
Brand Model Yggdrasil Speed Mesh Exit Capable Built-in Wifi Outdoor Year MSRP Used Price Notes
Globalscale Espressobin v5 300 Mbit/s Yes No1 No 2017 $49.00 ? Fails to boot, no longer available for purchase
Linksys WRT1900AC ? Yes Yes No 2014 $149.99
TP-Link Archer C7 AC1750 ? Yes Yes No 2013 $99.99 $40
TP-Link TL-WDR3500 ? Yes Yes No 2012 $44.99 $25
TP-Link TL-WDR4300 ? Yes Yes No 2012 $109.99 ?
Xiaomi Mi Router 3 ? Yes Yes No ? $39.99

1 USB and mini-pcie interfaces available to add a wifi interface

Mesh Radio Devices

These are radio devices that we can use to provide mesh node devices with connectivity to other mesh nodes.

Recommended Devices

These are devices that are known to work well with meshing software.

Overview of Recommended Devices
Brand Model Usecase Outdoor Year MSRP Used Price
Ubiquiti NanoStation 5AC Loco Mesh Radio Yes ? $49.00 ?
Ubiquiti UAP AC Mesh Mesh Radio Yes 2016 $99.00 ?

Point to Point Devices

These are devices that provide direct links between 2 locations. They usually use directional antennas to allow long range links. These radios can augment a mesh node by bridging longer distances that omni-directional radios might not reach. Because these links are planned at both ends, there is no need for the flexibility of custom firmware. Simply configure the devices with matching settings and provide line-of-sight between them.

Overview of Point to Point Devices
Brand Model Outdoor Year MSRP
Ubiquiti LiteBeam 5AC Gen2 Yes ? ?
Ubiquiti NanoBeam 5AC 16 Yes ? ?