Difference between revisions of "First Time Setup"

Jump to navigation Jump to search
(Add a remote support section to the outline.)
Line 1: Line 1:
 
== Setting Your Password ==
 
== Setting Your Password ==
 
== Enabling Remote Support ==
 
== Enabling Remote Support ==
 +
=== Authorize the Maintenance Team to Access Your Mesh Node ===
 +
# Navigate to System > Administration
 +
# Select the "SSH-Keys" tab
 +
## You should see something like this
 +
# Enter the following keys, clicking "Add Key" in between each
 +
<pre>
 +
...
 +
...
 +
</pre>
 +
 +
=== Enable the SSH over Yggdrasil Firewall Rule ===
 +
# Navigate to Network > Firewall
 +
# Select the "Traffic Rules tab
 +
## You should see something like this
 +
# Scroll down to "Allow-SSH-Yggdrasil"
 +
# Enable the Accept input checkbox
 +
## You should see something like this
 +
# Click "Save and Apply"
 +
## The button looks like this
 +
 
== The Diagnostic Page ==
 
== The Diagnostic Page ==
 
== The Yggdrasil Page ==
 
== The Yggdrasil Page ==
 
== The Internet Gateway Page ==
 
== The Internet Gateway Page ==

Revision as of 17:07, 13 August 2020

Setting Your Password

Enabling Remote Support

Authorize the Maintenance Team to Access Your Mesh Node

  1. Navigate to System > Administration
  2. Select the "SSH-Keys" tab
    1. You should see something like this
  3. Enter the following keys, clicking "Add Key" in between each
...
...

Enable the SSH over Yggdrasil Firewall Rule

  1. Navigate to Network > Firewall
  2. Select the "Traffic Rules tab
    1. You should see something like this
  3. Scroll down to "Allow-SSH-Yggdrasil"
  4. Enable the Accept input checkbox
    1. You should see something like this
  5. Click "Save and Apply"
    1. The button looks like this

The Diagnostic Page

The Yggdrasil Page

The Internet Gateway Page