Difference between revisions of "Globalscale ESPRESSObin v5"

Jump to navigation Jump to search
(Created page with "The ESPRESSObin v5 is a small single board computer similar to a raspberry pi. It has 3 ethernet ports, a USB 3.0 port, as well as an internal mPCIe slot. == Flashing == <ol>...")
 
Line 1: Line 1:
 
The ESPRESSObin v5 is a small single board computer similar to a raspberry pi. It has 3 ethernet ports, a USB 3.0 port, as well as an internal mPCIe slot.
 
The ESPRESSObin v5 is a small single board computer similar to a raspberry pi. It has 3 ethernet ports, a USB 3.0 port, as well as an internal mPCIe slot.
 +
 +
== Files ==
 +
[https://downloads.openwrt.org/releases/18.06.2/targets/mvebu/cortexa53/openwrt-18.06.2-mvebu-cortexa53-globalscale-espressobin-squashfs-sdcard.img.gz OpenWrt Stable 18.06.2 Image]
 +
 +
[https://downloads.openwrt.org/snapshots/targets/mvebu/cortexa53/openwrt-mvebu-cortexa53-globalscale-espressobin-squashfs-sdcard.img.gz OpenWrt Snapshot Image]
 +
 +
  
 
== Flashing ==
 
== Flashing ==

Revision as of 20:39, 14 April 2019

The ESPRESSObin v5 is a small single board computer similar to a raspberry pi. It has 3 ethernet ports, a USB 3.0 port, as well as an internal mPCIe slot.

Files

OpenWrt Stable 18.06.2 Image

OpenWrt Snapshot Image


Flashing

  1. Write openwrt-18.06.2-mvebu-cortexa53-globalscale-espressobin-ext4-sdcard.img.gz to a microsd card using the following command:
  2. zcat ~/Downloads/openwrt-18.06.2-mvebu-cortexa53-globalscale-espressobin-ext4-sdcard.img.gz | sudo dd of=/dev/mmcblk0
  3. Run sync before removing the sd card
  4. Insert the sd card into the ESPRESSObin and power it on