Difference between revisions of "Node Setup"

Jump to navigation Jump to search
m (Stephen304 moved page Mesh Network Setup to Node Setup without leaving a redirect)
(Revise wording and link to more places.)
Line 1: Line 1:
This page will help you set up your mesh node each step of the way. We have done plenty of research to provide you with informed recommendations on what works best.
+
This page will help you set up your mesh node each step of the way. We have done plenty of research to provide you with informed recommendations on what works best. If you have any questions about this process, or if you just want to be in touch, please join one of our [https://riot.im/app/#/group/+massmesh:matrix.org chat channels.]
  
== Choosing your Devices ==
+
== Choose Your Devices ==
First, you will need to select and acquire the hardware components of your custom router. We have gathered information on many [[:Category:Devices|devices]] to make your selection easier.
+
First, you will need to select and acquire the hardware components of your mesh node. We have gathered information on many [[:Category:Devices|devices]] to make your selection easier. We also maintain a list of [[Hardware Bundles]] for your convenience.
  
== Flashing the Firmware ==
+
== Flash The Firmware ==
The procedure to flash the firmware varies from device to device. The [[:Category:Devices|devices]] page contains links to wiki pages for each listed device.
+
The procedure to flash the firmware varies from device to device. The [[:Category:Devices|devices]] page contains links to tutorials for each listed device.
  
Refer to the wiki page for your device to find its corresponding flashing procedure. Or if you prefer, bring your node to one of our meetings and we will be happy to flash it for you!
+
Refer to the wiki page(s) of your chosen your device(s) to find their corresponding flashing tutorial. Or, if you prefer, bring your hardware to one of our weekly [https://massmesh.org/wiki/index.php?title=Contact_and_Meeting_Info meetups], and we will be happy to flash it for you!
  
== Configuring your Node ==
+
== Configure Your Node ==
The preconfigured MassMesh firmware aims to have as much as possible done out of the box.
+
The pre-configured Mass Mesh firmware aims to have as much as possible done out of the box.
  
If you are using stock OpenWrt, see [[Manual Configuration]] for how to replicate the prebuilt firmware settings.
+
If you are using stock OpenWrt, see [[Manual Configuration]] for how to replicate our settings.
 +
 
 +
== Install Your Node ==
 +
 
 +
In addition to providing power to the node, you may also want to use the following ports on your device:
 +
 
 +
* The WAN port (on multi-port devices) may be connected to a spare LAN port on your regular router (or directly to your modem) to share your internet connection with the mesh
 +
* The LAN port may be connected to a switch or any device to provide internet to that device through the mesh
 +
 
 +
=== Tips For Best Results ===
  
== Placing your Node ==
 
 
In order to communicate on the mesh, your node must be able to talk to other nodes in your area. Here are some suggestions to help maximize your signal:
 
In order to communicate on the mesh, your node must be able to talk to other nodes in your area. Here are some suggestions to help maximize your signal:
  
Line 20: Line 28:
 
* Indoor nodes should be placed on or near windows facing the street and other buildings
 
* Indoor nodes should be placed on or near windows facing the street and other buildings
 
* Nodes will work best if they have a direct line of sight to each other
 
* Nodes will work best if they have a direct line of sight to each other
 
== Wiring Up your Node ==
 
 
In addition to providing power to the node, you may also want to use the following ports on your device:
 
 
* The WAN port (on multi-port devices) may be connected to a spare LAN port on your regular router (or directly to your modem) to share your internet connection with the mesh
 
* The LAN port may be connected to a switch or any device to provide internet to that device through the mesh
 
  
 
== Seeking Assistance ==
 
== Seeking Assistance ==
 
If you need help at any point, [[Contact and Meeting Info|get in touch with us]] online or in person.
 
If you need help at any point, [[Contact and Meeting Info|get in touch with us]] online or in person.

Revision as of 12:25, 16 January 2020

This page will help you set up your mesh node each step of the way. We have done plenty of research to provide you with informed recommendations on what works best. If you have any questions about this process, or if you just want to be in touch, please join one of our chat channels.

Choose Your Devices

First, you will need to select and acquire the hardware components of your mesh node. We have gathered information on many devices to make your selection easier. We also maintain a list of Hardware Bundles for your convenience.

Flash The Firmware

The procedure to flash the firmware varies from device to device. The devices page contains links to tutorials for each listed device.

Refer to the wiki page(s) of your chosen your device(s) to find their corresponding flashing tutorial. Or, if you prefer, bring your hardware to one of our weekly meetups, and we will be happy to flash it for you!

Configure Your Node

The pre-configured Mass Mesh firmware aims to have as much as possible done out of the box.

If you are using stock OpenWrt, see Manual Configuration for how to replicate our settings.

Install Your Node

In addition to providing power to the node, you may also want to use the following ports on your device:

  • The WAN port (on multi-port devices) may be connected to a spare LAN port on your regular router (or directly to your modem) to share your internet connection with the mesh
  • The LAN port may be connected to a switch or any device to provide internet to that device through the mesh

Tips For Best Results

In order to communicate on the mesh, your node must be able to talk to other nodes in your area. Here are some suggestions to help maximize your signal:

  • Weather resistant nodes should be mounted on the outside of the house or to a column facing the street
  • Indoor nodes should be placed on or near windows facing the street and other buildings
  • Nodes will work best if they have a direct line of sight to each other

Seeking Assistance

If you need help at any point, get in touch with us online or in person.