Difference between revisions of "RPF Raspberry Pi 4 Model B"

Revision as of 18:49, 4 January 2020

Raspberry Pi 4 Model B

One Raspberry Pi 4 Model B
- The official power supply is not required, but strongly recommended.
- You may choose any memory size option. 1GB is sufficient.
One 4GB+ microSD card
One or more USB -> Ethernet adapter(s)

Download the "Sysupgrade" file from the Files section.
Flash the firmware onto your microSD card using Balena Etcher, or a similar tool.
1. For help with this step, see Flashing Removable Media.
Insert the microSD card and connect the Raspberry Pi to power.

@@ Line 1: / Line 1: @@
+[[Category:Devices]]
 [[Category:Raspberry Pi Foundation]]
 [[File:Rpf-raspberry-pi-4-model-b.png|thumb|Raspberry Pi 4 Model B]]
@@ Line 17: / Line 18: @@
 * One or more [https://www.amazon.com/AmazonBasics-Gigabit-Ethernet-Internet-Adapter/dp/B00M77HMU0?psc=1&SubscriptionId=AKIAILSHYYTFIVPWUY6Q&tag=duckduckgo-ffab-20&linkCode=xm2&camp=2025&creative=165953&creativeASIN=B00M77HMU0 USB -> Ethernet adapter(s)]
-== Flashing ==
+== Instructions ==
-The Raspberry Pi uses a removable microSD card for storage, which makes it easy to load custom firmware onto it.
+#Download the "[https://github.com/MassMesh/meta-imagebuilder-artifacts/blob/master/massmesh/meshnode/rpi-4/openwrt-massmesh-meshnode-brcm2708-bcm2711-rpi-4-squashfs-sysupgrade.img.gz Sysupgrade]" file from the Files section.
+#Flash the firmware onto your microSD card using [https://www.balena.io/etcher/ Balena Etcher], or a similar tool.
-First, download the "Sysupgrade" file from the Files section, then refer to the [[Flashing Removable Media]] page to write the firmware to the card.
+##For help with this step, see [[Flashing Removable Media]].
+# Insert the microSD card and connect the Raspberry Pi to power.
-After you've completed the steps on that page, you will be able to insert the microSD card into the Raspberry Pi and connect it to power. It should boot into the custom firmware.