Template:TFTP Flashing Steps

Revision as of 10:40, 15 September 2020 by Stephen304 (talk | contribs)
Jump to navigation Jump to search

This template allows easy inclusion of TFTP flashing instructions across the wiki.

Steps

Enter TFTP Mode

Follow the steps for your device to enter TFTP Mode

Set Up a Static IP Address

The next step is to assign your computer a static IP address in the appropriate subnet for your device. See the wiki page for your device if you are unsure.

  1. Windows: Setting a static IP address in Windows 10
  2. Mac: Setting a static IP address in OSX
  3. Linux: Setting a static IP address in Ubuntu 18.04 desktop
Sending Firmware via TFTP
  1. Download the firmware file you wish to flash
  2. Launch a command prompt/terminal, and enter the following, one line at a time:
tftp
tftp> connect <device_ip>
tftp> binary
tftp> rexmt 1
tftp> timeout 60
tftp> put <firmware_filename>
Sent x bytes in x seconds