Difference between revisions of "Ubiquiti NanoStation 5AC Loco"
Jump to navigation
Jump to search
(Reference based on roadblock yesterday.) |
m (add architecture note b/c it's handy.) |
||
| Line 3: | Line 3: | ||
The NanoStation 5AC Loco is a directional, weather resistant, PoE powered radio with a beam width of 90 degrees and a secondary omnidirectional radio. This makes it useful for simultaneously meshing on one radio while providing an access point for client devices on the other. | The NanoStation 5AC Loco is a directional, weather resistant, PoE powered radio with a beam width of 90 degrees and a secondary omnidirectional radio. This makes it useful for simultaneously meshing on one radio while providing an access point for client devices on the other. | ||
| + | |||
| + | If you're in a pickle, and need to download opkg files for an offline NanoStation, the architecture is MIPS 24KC. | ||
== Files == | == Files == | ||
Revision as of 22:05, 26 November 2019
The NanoStation 5AC Loco is a directional, weather resistant, PoE powered radio with a beam width of 90 degrees and a secondary omnidirectional radio. This makes it useful for simultaneously meshing on one radio while providing an access point for client devices on the other.
If you're in a pickle, and need to download opkg files for an offline NanoStation, the architecture is MIPS 24KC.
Files
MassMesh Firmware (Factory) (Latest)
MassMesh Firmware (Sysupgrade) (Latest)
Flashing
From Stock Firmware
- Download the Stock Firmware Image v8.5.0.36727 from above as well as the MassMesh Factory image file
- Power on the NanoStation via a PoE injector and connect the other side of the PoE injector to a computer
- Assign a static IP/netmask of
192.168.1.25/24to the computer - Use a browser to visit http://192.168.1.20/
- Login using the set password or default credentials
ubnt / ubnt - Navigate to settings and downgrade the stock firmware to v8.5.0.36727 using the downloaded image file
- Follow the instructions for enabling updates to the firmware on OpenWRT's website.
From OpenWrt
- Download the latest MassMesh Sysupgrade firmware file from above
- Connect to the device and navigate to the IP address of the device
- Note: MassMesh MeshRadio firmwares use an IP of 192.168.2.1. To access the administration UI, set an ip/netmask of 192.168.2.10/24 and browse to http://192.168.2.1/
- Navigate to System → Backup / Flash Firmware → Actions: Flash new firmware image
- Choose the sysupgrade file previously downloaded and click Flash
- Wait for the device to complete and reboot
