Difference between revisions of "RPF Raspberry Pi 4 Model B"
Jump to navigation
Jump to search
Stephen304 (talk | contribs) (Created page with "Category:Raspberry Pi Foundation thumb|Raspberry Pi 4 Model B == Flashing == The Raspberry Pi uses a removable microSD card for st...") |
(Add materials and files sections) |
||
| Line 1: | Line 1: | ||
[[Category:Raspberry Pi Foundation]] | [[Category:Raspberry Pi Foundation]] | ||
[[File:Rpf-raspberry-pi-4-model-b.png|thumb|Raspberry Pi 4 Model B]] | [[File:Rpf-raspberry-pi-4-model-b.png|thumb|Raspberry Pi 4 Model B]] | ||
| + | |||
| + | == Files == | ||
| + | |||
| + | [https://github.com/MassMesh/meta-imagebuilder-artifacts/blob/master/massmesh/meshnode/rpi-4/openwrt-massmesh-meshnode-brcm2708-bcm2711-rpi-4-squashfs-factory.img.gz Mass Mesh Firmware (Factory) (Latest)] | ||
| + | |||
| + | [https://github.com/MassMesh/meta-imagebuilder-artifacts/blob/master/massmesh/meshnode/rpi-4/openwrt-massmesh-meshnode-brcm2708-bcm2711-rpi-4-squashfs-sysupgrade.img.gz Mass Mesh Firmware (Sysupgrade) (Latest)] | ||
| + | |||
| + | [https://github.com/MassMesh/meta-imagebuilder-artifacts/tree/master/massmesh/meshnode/rpi-4 Mass Mesh Firmware Build Artifacts] | ||
| + | |||
| + | == Materials == | ||
| + | * [https://www.pishop.us/product/raspberry-pi-4-model-b-1gb/ One Raspberry Pi 4 Model B] | ||
| + | ** The official power supply is not required, but strongly recommended. | ||
| + | ** You may choose any memory size option. 1GB is sufficient. | ||
| + | * One 4GB+ microSD card | ||
| + | * One or more [https://www.amazon.com/AmazonBasics-Gigabit-Ethernet-Internet-Adapter/dp/B00M77HMU0?psc=1&SubscriptionId=AKIAILSHYYTFIVPWUY6Q&tag=duckduckgo-ffab-20&linkCode=xm2&camp=2025&creative=165953&creativeASIN=B00M77HMU0 USB -> Ethernet adapter(s)] | ||
== Flashing == | == Flashing == | ||
| − | The Raspberry Pi uses a removable microSD card for storage, which makes it easy to load custom firmware onto it. | + | The Raspberry Pi uses a removable microSD card for storage, which makes it easy to load custom firmware onto it. |
| + | |||
| + | First, download the "Sysupgrade" file from the Files section, then refer to the [[Flashing Removable Media]] page to write the firmware to the card. | ||
| − | + | After you've completed the steps on that page, you will be able to insert the microSD card into the Raspberry Pi and connect it to power. It should boot into the custom firmware. | |
Revision as of 16:07, 24 November 2019
Files
Mass Mesh Firmware (Factory) (Latest)
Mass Mesh Firmware (Sysupgrade) (Latest)
Mass Mesh Firmware Build Artifacts
Materials
- One Raspberry Pi 4 Model B
- The official power supply is not required, but strongly recommended.
- You may choose any memory size option. 1GB is sufficient.
- One 4GB+ microSD card
- One or more USB -> Ethernet adapter(s)
Flashing
The Raspberry Pi uses a removable microSD card for storage, which makes it easy to load custom firmware onto it.
First, download the "Sysupgrade" file from the Files section, then refer to the Flashing Removable Media page to write the firmware to the card.
After you've completed the steps on that page, you will be able to insert the microSD card into the Raspberry Pi and connect it to power. It should boot into the custom firmware.
