Difference between revisions of "Globalscale ESPRESSObin v5"
Jump to navigation
Jump to search
Stephen304 (talk | contribs) |
Stephen304 (talk | contribs) |
||
| Line 13: | Line 13: | ||
== Flashing == | == Flashing == | ||
<ol> | <ol> | ||
| − | <li>Write <code>openwrt-18.06.2-mvebu-cortexa53-globalscale-espressobin- | + | <li>Write <code>openwrt-18.06.2-mvebu-cortexa53-globalscale-espressobin-squashfs-sdcard.img.gz</code> to a microsd card using the following command:</li> |
| − | <pre>zcat ~/Downloads/openwrt-18.06.2-mvebu-cortexa53-globalscale-espressobin- | + | <pre>zcat ~/Downloads/openwrt-18.06.2-mvebu-cortexa53-globalscale-espressobin-squashfs-sdcard.img.gz | sudo dd of=/dev/mmcblk0</pre> |
<li>Run <code>sync</code> before removing the sd card</li> | <li>Run <code>sync</code> before removing the sd card</li> | ||
<li>Insert the sd card into the ESPRESSObin and power it on</li> | <li>Insert the sd card into the ESPRESSObin and power it on</li> | ||
</ol> | </ol> | ||
Revision as of 15:25, 15 April 2019
The ESPRESSObin v5 is a small single board computer similar to a raspberry pi. It has 3 ethernet ports, a USB 3.0 port, as well as an internal mPCIe slot.
Files
Flashing
- Write
openwrt-18.06.2-mvebu-cortexa53-globalscale-espressobin-squashfs-sdcard.img.gzto a microsd card using the following command: - Run
syncbefore removing the sd card - Insert the sd card into the ESPRESSObin and power it on
zcat ~/Downloads/openwrt-18.06.2-mvebu-cortexa53-globalscale-espressobin-squashfs-sdcard.img.gz | sudo dd of=/dev/mmcblk0
