Difference between revisions of "Globalscale ESPRESSObin v5"
Jump to navigation
Jump to search
(Added instructions for building the image.) |
m |
||
| Line 25: | Line 25: | ||
<pre>ls ./communities/massmesh/meshnode/bin/espressobin/</pre> | <pre>ls ./communities/massmesh/meshnode/bin/espressobin/</pre> | ||
| + | |||
| + | == Modify uBoot Variables == | ||
== Flashing == | == Flashing == | ||
Revision as of 21:24, 13 June 2019
The ESPRESSObin v5 is a small single board computer similar to a raspberry pi. It has 3 ethernet ports, a USB 3.0 port, as well as an internal mPCIe slot.
Files
Build The Image
First, you will need to grab the [meta-imagebuilder](https://github.com/massmesh/meta-imagebuilder) repository. This repository has a script in it that builds pre-configured OpenWRT images.
git clone https://github.com/massmesh/meta-imagebuilder
Next, build the image using the `build` script.
cd meta-imagebuilder ./build massmesh meshnode espressobin
You now should see `.img.gz` files when you run
ls ./communities/massmesh/meshnode/bin/espressobin/
Modify uBoot Variables
Flashing
- Write
openwrt-18.06.2-mvebu-cortexa53-globalscale-espressobin-squashfs-sdcard.img.gzto a microsd card using the following command: - Run
syncbefore removing the sd card - Insert the sd card into the ESPRESSObin and power it on
zcat ~/Downloads/openwrt-18.06.2-mvebu-cortexa53-globalscale-espressobin-squashfs-sdcard.img.gz | sudo dd of=/dev/mmcblk0
