Category:Devices

Revision as of 16:54, 6 February 2021 by Lurker42o (talk | contribs) (→‎Work In Progress Devices: Add Nanostation M5 XW b/c I'm working on that one)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

In order to mesh with other mesh nodes in your neighborhood network, you will require two main components: a device to run the Mass Mesh firmware and a radio so that you can communicate with other nodes.

Note: We also maintain a helpful list of Hardware Bundles for your convenience.
Warning: If you're buying a new device, check for it in OpenWrt's "Table of Hardware" before buying!

Mesh Node Devices

These are devices that can run the meshing protocol (Yggdrasil.) Once they have the Mass Mesh firmware flashed, you can connect to them for access to the mesh via wifi and/or ethernet. They will also automatically discover and connect to nearby mesh nodes via their connected mesh radio.

Supported Mesh Node Devices
Brand Model Vendor Materials Yggdrasil Speed Mesh Exit Capable Built-in Wifi Outdoor Year MSRP Images
Raspberry Pi Foundation Raspberry Pi 4 Model B Hardware Specifications 450 Mbit/s No3 Yes No2 2019 $35.00 https://downloads.massmesh.net/snapshots/images/meshnode/rpi-4/
PC Engines APU2 Owner's Manual, Product File 950 Mbit/s Yes No1 No2 2016 $115.00 https://downloads.massmesh.net/snapshots/images/meshnode/apu2/
Globalscale Espressobin v5 300 Mbit/s Yes No1 No1 2017 $49.00 https://downloads.massmesh.net/snapshots/images/meshnode/globalscale_espressobin/

1 USB and 2 mini-pcie interfaces available to add one or more wifi interfaces
2 Possible with outdoor case
3 Possible with additional adapters

Mesh Radio Devices

Supported Point-To-Multi-Point (PTMP) Radios
Brand Model Vendor Materials Outdoor Year MSRP Images
Ubiquiti NanoStation 5AC Loco Quick Start Guide, Data Sheet Yes ? $60.00 https://downloads.massmesh.net/snapshots/images/meshradio/ubnt_nanostation-ac-loco/
Ubiquiti UAP AC Mesh Quick Start Guide, Data Sheet Yes 2016 $120.00 https://downloads.massmesh.net/snapshots/images/meshradio/ubnt_unifiac-mesh/

Point-To-Point Radio Devices

PTP radios are devices that provide a direct link between 2 locations, usually over a long range. There is no need for custom firmware on these radios. Simply configure both ends of the link with matching settings and provide line-of-sight between them to connect.

Supported Point-To-Point (PTP) Radios
Brand Model Vendor Materials Outdoor Year MSRP
MikroTik MikroTik wAP 60G Quick Start Guide Yes ? $99
Ubiquiti LiteBeam 5AC Gen2 Quick Start Guide, Data Sheet Yes ? ?
Ubiquiti NanoBeam 5AC 16 Quick Start Guide, Data Sheet Yes ? ?

Work In Progress Devices

Warning: The following devices are unsupported. If you are looking to host a node, we recommend that you buy one of the supported devices, as it's guaranteed that they will work in the mesh.
Note: A great way to help the tech team is to work with us to add support for the WIP devices.
Work In Progress (WIP) Devices
Brand Model Yggdrasil Speed Mesh Exit Capable Built-in Wifi Outdoor Year MSRP Notes
Ubiquiti EdgeRouter Lite 40 Mbit/s No No No 2018 $129 This device could work, but is super slow running Yggdrasil.
Linksys WRT1900AC ? Yes Yes No 2014 $149.99
TP-Link Archer C7 AC1750 ? Yes Yes No 2013 $99.99
TP-Link TL-WDR3500 ? Yes Yes No 2012 $44.99
TP-Link TL-WDR4300 ? Yes Yes No 2012 $109.99
Xiaomi Mi Router 3 ? Yes Yes No ? $30.00
Aerohive AP330 ? ? Yes No 2013 ? Must flash Open WRT via UART.
Ubiquiti Nanostation M5 (XW) ? ? Yes Yes ? ?

1 USB and mini-pcie interfaces available to add a wifi interface