Module:UserLinks/config
Jump to navigation
Jump to search
Documentation for this module may be created at Module:UserLinks/config/doc
-------------------------------------------------------------------------------- -- UserLinks configuration -- -- This module provides configuration and localisation messages for -- -- [[Module:UserLinks]]. See the comments in the code below for explanations -- -- of what each message does. -- -------------------------------------------------------------------------------- local cfg = {} -- Don't edit this line. -------------------------------------------------------------------------------- -- Display values -- -- These messages are the display values for the user links. These are the -- -- most visible messages in the module. They should be short, but -- -- descriptive. Spaces are automatically escaped with , so there is no -- -- need to add any &nsbp; values here. -- -------------------------------------------------------------------------------- -- The user talk page. cfg['display-talk'] = 'talk' -- The user's contributions. cfg['display-contributions'] = 'contribs' -- The user's edit count, using the edit count tool on WMF Labs. cfg['display-count'] = 'count' -- Log of the user's page moves. cfg['display-moves'] = 'page moves' -- All the user's logged actions. cfg['display-logs'] = 'logs' -- Analysis of the user's (non-)automated contributions. cfg['display-autoedits'] = 'non-automated edits' -- The user's block log. cfg['display-blocklog'] = 'block log' -- Blocks that the user has performed. cfg['display-blocks'] = 'blocks' -- Link to the interface where the user can be blocked. cfg['display-blockuser'] = 'block user' -- CentralAuth, the global account manager for the user. cfg['display-centralauth'] = 'central auth' -- The user's deleted contributions. cfg['display-deletedcontributions'] = 'deleted contribs' -- Likn to email the user. cfg['display-email'] = 'email' -- Analysis of the user's edit summaries, using the tool on WMF Labs. cfg['display-editsummaries'] = 'edit summaries' -- Deletions that the user has performed. cfg['display-deletions'] = 'deletions' -- The user's entry on [[Special:ListUsers]]. cfg['display-listuser'] = 'list user' -- A display of the user's global contributions, using the sulutil: interwiki -- prefix. cfg['display-sul'] = 'global contribs' -- All logs of actions performed on the user or their user page. cfg['display-targetlogs'] = 'target logs' -- Log of times the user has triggered the AbuseFilter (also known as the -- edit filter). cfg['display-abuselog'] = 'filter log' -- Page protections that the user has performed. cfg['display-protections'] = 'protections' -- Log of rights changes that the user has performed. cfg['display-rights'] = 'rights' -- Log of username changes that the user has performed. cfg['display-renames'] = 'renames' -- Link to a list of the user's requests for adminship. cfg['display-rfa'] = 'RfA' -- Data about the user from the MediaWiki Web API. cfg['display-api'] = 'api' -- List of the user's local file uploads. cfg['display-uploads'] = 'uploads' -------------------------------------------------------------------------------- -- Page names -- -- Page names used in formatting some of the user links. -- -------------------------------------------------------------------------------- -- The base page for a request for adminship link. This assumes that the link -- is of the format [[Base page/username]]. If your wiki uses a different -- format, consider adding a new link at [[Module:UserLinks/extra]], or you can -- leave a message at [[w:en:Template talk:User-multi]] to ask the module -- developers how best to deal with it. cfg['page-rfa'] = 'Wikipedia:Requests for adminship' -------------------------------------------------------------------------------- -- Error messages -- -- The following are error messages that may occur when the module is run. -- -- These are the more common error messages that are localisable; other, -- -- rarer error messages may be raised from other modules or directly from -- -- Lua. The messages ending with "section" are the section names on a help -- -- page that give advice to users who encounter the error. The help page is -- -- defined in the 'error-config-message-help' message. -- -------------------------------------------------------------------------------- -- The module didn't detect a username from the "user" or "User" parameters. -- This could be because no username was specified, or because the user used a -- positional parameter and their username contains an equals sign, -- e.g. {{user|John=Smith}}, rather than {{user|1=John=Smith}}. cfg['error-nousername'] = 'no username detected' cfg['error-nousername-section'] = 'No username detected' -- The input to the "project" or "Project" arguments wasn't a valid interwiki -- prefix or a valid language code. $1 is the code that was input to the module. cfg['error-invalidproject'] = '"$1" is not a valid project or language code' cfg['error-invalidproject-section'] = 'Not a valid project or language code' -- The input to the "lang" or "Lang" arguments wasn't a valid interwiki -- prefix or a valid language code. $1 is the code that was input to the module. cfg['error-invalidlanguage'] = '"$1" is not a valid language code' cfg['error-invalidlanguage-section'] = 'Not a valid language code' -- The user didn't specify any link codes. This is only an error when using the -- "single" function to return a single link; the "main" function includes a -- user page link by default. cfg['error-nolinkcode'] = 'no link code specified' cfg['error-nolinkcode-section'] = 'No link code specified' -- The link code passed to the module was malformed. This means it was either -- not a string value or it was the blank string. cfg['error-malformedlinkcode'] = 'malformed link code detected' cfg['error-malformedlinkcode-section'] = 'Malformed link code detected' -- No link function exists for the code specified, so the module cannot make -- the link. $1 is the code that was passed to the module. cfg['error-invalidlinkcode'] = '"$1" is not a valid link code' cfg['error-invalidlinkcode-section'] = 'Not a valid link code' -- The snippets table was accessed, but there was no value for the key it was -- accessed with. This is not usually visible by end users; it is probably a -- mistake in one of the link functions in [[Module:UserLinks/extra]]. $1 is the -- key that was passed to the module. cfg['error-nosnippet'] = 'no snippet exists for the key "$1"' cfg['error-nosnippet-section'] = 'No snippet exists' -------------------------------------------------------------------------------- -- Error configuration -- -- Configuration for the display of the error messages. -- -------------------------------------------------------------------------------- -- The error message used when a section link is available. $1 is the error -- message, and $2 is the name of the section. cfg['error-config-message-help'] = '[[Template:User-multi|User-multi]] error:' .. ' $1 ([[Template:User-multi#$2|help]]).' -- The error message used when ano section link is available. $1 is the error -- message. cfg['error-config-message-nohelp'] = '[[Template:User-multi|User-multi]] error:' .. ' $1.' -- The name of the error category. Pages are put in this category if any errors -- are encountered. cfg['error-config-category'] = 'UserLinks transclusions with errors' -------------------------------------------------------------------------------- -- Snippet defaults -- -- Some of the snippets require default values when the user doesn't specify -- -- "project" or "lang" arguments. Those default values are stored here. -- -------------------------------------------------------------------------------- -- The short project interwiki prefix. cfg['snippet-project-default'] = 'w' -- The long project interwiki prefix. cfg['snippet-projectlong-default'] = 'wikipedia' -- The MediaWiki language code for the wiki. cfg['snippet-lang-default'] = 'en' -------------------------------------------------------------------------------- -- Link table headers -- -- The headers used in the table of links used on documentation pages. -- -------------------------------------------------------------------------------- -- The link code. cfg['linktable-codeheader'] = 'Code' -- The link preview. cfg['linktable-previewheader'] = 'Preview' -------------------------------------------------------------------------------- -- End configuration -- -------------------------------------------------------------------------------- return cfg -- Don't edit this line.