Difference between revisions of "Template:TFTP Flashing Steps"

Jump to navigation Jump to search
Line 9: Line 9:
  
 
=== Set Up a Static IP Address ===
 
=== Set Up a Static IP Address ===
The next step is to assign your computer a static IP address of <code>192.168.1.25/24</code>
+
The next step is to assign your computer a static IP address {{#if: {{{user_ip|}}}|of <code>{{{user_ip}}}</code>|in the appropriate subnet for your device. See the wiki page for your device if you are unsure}}.
 
# '''Windows:''' [https://winaero.com/blog/set-static-ip-address-windows-10/ Setting a static IP address in Windows 10]
 
# '''Windows:''' [https://winaero.com/blog/set-static-ip-address-windows-10/ Setting a static IP address in Windows 10]
 
# '''Mac:''' [https://osxdaily.com/2010/12/17/set-static-ip-address-mac/ Setting a static IP address in OSX]
 
# '''Mac:''' [https://osxdaily.com/2010/12/17/set-static-ip-address-mac/ Setting a static IP address in OSX]

Revision as of 10:21, 15 September 2020

This template allows easy inclusion of TFTP flashing instructions across the wiki.

Steps

Enter TFTP Mode

Follow the steps for your device to enter TFTP Mode

Set Up a Static IP Address

The next step is to assign your computer a static IP address in the appropriate subnet for your device. See the wiki page for your device if you are unsure.

  1. Windows: Setting a static IP address in Windows 10
  2. Mac: Setting a static IP address in OSX
  3. Linux: Setting a static IP address in Ubuntu 18.04 desktop

Downgrade Ubiquiti AirOS

Because we are "jailbreaking" the Ubiquiti router, we have to downgrade to an older version of their proprietary firmware first. Using a tool called TFTP, we can do this quite simply.

  1. Download the firmware file you wish to flash
  2. Launch a command prompt/terminal, and enter the following, one line at a time:
tftp
tftp> connect <device_ip>
tftp> binary
tftp> rexmt 1
tftp> timeout 60
tftp> put <firmware_filename>
Sent x bytes in x seconds